Factory Customization Villa Elevator Homeless Lift Install Outdoor
Indoor Elevator Lift
Villa Elevator Install
The installation of Villa elevators usually requires professional
elevator companies or qualified installation teams to complete. The
following is the general installation process of Villa elevators:
1,Verify suitability: before deciding to install the Villa
elevator, an evaluation is needed first to ensure that the
structure and design of the villa can support the installation of
the elevator. This usually needs to take into account the spatial
layout of the villa, the location and size of the elevator shaft
and other factors.
2,Design Selection: select the appropriate elevator type and
specification according to the demand and space of the villa. You
can choose straight ladder (direct) or traction ladder (steel cable
Drive), and determine the required bearing capacity, internal size
and appearance design.
3,Project Preparation: The installation team will cooperate with
villa owners and designers to formulate detailed project plans and
installation plans. This includes the construction of elevator
shaft, installation and preparation of power and communication
facilities, etc.
4,Shaft Construction: according to the design requirements and
installation scheme, the elevator shaft shall be built inside or
near the villa. This may involve structural engineering, concrete
construction, wall and ceiling renovation, etc.
5,Installation of elevator components: install the elevator
components into the shaft step by step according to the
installation instructions provided by the manufacturer. This
includes car, guide rail, door system, driving device, control
panel, etc.
6,Electrical and communication connection: conduct electrical
wiring and connect the PSU, lighting and communication lines of the
elevator with the power system and network of the villa.
7,Debugging and testing: After the installation is completed,
conduct comprehensive debugging and testing on the elevator to
ensure its normal operation, safety and reliability.
8,Audit and acceptance: After the installation is completed, it
usually needs to be reviewed and accepted by relevant departments
to ensure that the elevator meets the local safety standards and
regulatory requirements.
Villa Elevator Install
Celing: Spray steel plate, ligtt belt, spotlightsdar
wall: Champogre gold stairless steel, spray stedl plate.block
titonum dscorathe strip, lomp be, decorathve po nting
Floar: Pvc
Advanced drive system
Armed with advanced gearless permanent magnet synchronous traction
machine(PMSM),our elevators are famous for their simple structure,
high speed and stability. They can reach maximum speed up to the
world leading level, therefore, basically suiting building with
different floors.
The application of a series of intelligent technologies to Tenau
villa not only brings you comfort but also health.
| Machine room-less passenger elevator |
| Load(kg) | NO.of persons | speed(m/s) | door opening type | opening size
(width X high mm) | net size
(width X high mm) | Hoistway net size (mm) |
| (width X high mm) | OH | PP |
| 630 | 8 | 1.0 | split door | 800 | 1300x1250 | 2100x1700 | 4500 | 1500 |
| 1.5 | 4600 | 1600 |
| 1.75 | 4700 | 1700 |
| 800 | 10 | 1.0 | 800 | 1400x1350 | 2200x1800 | 4500 | 1500 |
| 1.5 | 4600 | 1600 |
| 1.75 | 4700 | 1700 |
| 1000 | 13 | 1.0 | 900 | 1600x1500 | 2400x2000 | 4500 | 1500 |
| 1.5 | 4600 | 1600 |
| 1.75 | 4700 | 1700 |
| 1150 | 15 | 1.0 | 1000 | 1750x1500 | 2600x2000 | 4500 | 1500 |
| 1.5 | 4600 | 1600 |
| 1.75 | 4700 | 1700 |
| Small machine room passenger elevator |
| Load(kg) | NO.of persons | speed(m/s) | door opening type | opening size
(width X high mm) | net size
(width X high mm) | Hoistway net size (mm) | machine room size(mm) |
| (width X high mm) | OH | PP |
width X high mm | MR.H |
| 630 | 8 | 1.0 | split door | 800 | 1300x1250 | 1900x1900 | 4400 | 1400 | 1900x1900 | 2300 |
| 1.5 | 4500 | 1500 |
| 1.75 | 4700 | 1600 |
| 800 | 10 | 1.0 | 800 | 1400x1350 | 2000x2000 | 4400 | 1400 | 2000x2000 |
| 1.5 | 4500 | 1500 |
| 1.75 | 4600 | 1600 |
| 1000 | 13 | 1.0 | 900 | 1600x1500 | 2200x2200 | 4400 | 1400 | 2200x2200 |
| 1.5 | 4500 | 1500 |
| 1.75 | 4600 | 1600 |
| 1150 | 15 | 1.0 | 1000 | 1750x1500 | 2300x2200 | 4400 | 1400 | 2300x2200 |
| 1.5 | 4500 | 1500 |
| 1.75 | 4600 | 1600 |
| lnformation Display |
| Hall and car digital position indicator | Running number display |
| Hall and car call/register | Floor display character arbitrary setting |
| Hall and car running direction display | |
| Steady Running |
| Return to base station without call | Pre-torque output |
| Full collective control | Upon elevator floor setting |
| Independentservice | Hoistway self-learning |
| Full-load direct running (LNS] | End station for speed and floor number correction |
| Automatic door switch | Parking |
The application of a series of intelligent technologies to Tenau
villa not only brings you comfort but also health.
We offer a contactless button, push button, COP, LOP , hall lantern
, segment ,dot matrix , LCD and TFT displays etc.
Shanghai Zan Feng (CZANF) Technology Co., Ltd provides the
customized service and solutions for elevator electrical system and specializes in elevator components. The
product scope ranges from contactless button, push button, COP, LOP , hall lantern , segment ,dot matrix , LCD
and TFT displays , hoistway fixture , intercom system , traveling cables to other spare parts of
elevator.
We pursue the sustainable success with customers. When it comes to
Elevator components, we are about as materials as they come. That’s
because we are in the elevator components many years with very wide
supply system. We are more committed to the intelligent development
of elevators in the near future and becoming the preferred partner
for smart and sustainable city development.
FAQ
1. What can I get the quotation?
Within 24 hours the inquiry will be reply.If you are very urgent
the price,
pls call us or tell us your email so that we will regard your
inquiry priority.
2. How can i get a sample to check your quality?
Provide our existing sample to check our quality,the shipping cost
need to paid by you.After price confirmation,you can
require for samples to check our quality,but sample cost need to
paid by you.the sample cost can be refundable if you bulk order
quantity reach our request.
3. What kind of files do you accept for printing?
PDF, Adoble Illustrator, CDR
4. Can you do the design for us?
Yes. We have a professional designing team,just tell us your
details and we will help to carry out your idrars into perfect
products.it's also ok if you do not have the complete files.Sent us
high resolution images,we can design the layout you want.
If you send your LOGO to us,we will make the artwork for you
reference.
Should you have any question ,pls do not hesitate to contact me.
